YachtDatabase.com

Review of Rebel 16


Basic specs.

sail specifications
The Rebel 16 is a small sailing dinghy designed by the American maritime architect Ray Greene together with Alvin Youngquist also from United States of America in the late forties. The Rebel 16 is built by the American yard Ray Greene & Co..

Here we would have liked to show you nice photos of the Rebel 16.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Rebel 16 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.


Rig

The Rebel 16 is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.


Keel

CentreBoard

The Rebel 16 is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.

The boat can sail close to the beach as the draft is just 0.15 - 0.25 meter (0.49 - 0.79 ft) dependent of the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Rebel 16 is about 54 kg/cm, alternatively 307 lbs/inch.
Meaning: if you load 54 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 307 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Rebel 16 is 2.90.

Wide Slim 76% 0 50 100
Compared with other similar dinghies it is slimmer than 76% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Rebel 16 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References