YachtDatabase.com

Review of Mancini 40 Sloop


null Sorry, the advertisement is no longer available.

Basic specs.

sail specifications
The Mancini 40 Sloop is a large sailboat designed by the maritime architect Rodolfo Foschi.

Here we would have liked to show you nice photos of the Mancini 40 Sloop.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Mancini 40 Sloop or similar boat for sale

Hull

The hull is made of aluminium. Aluminum is strong and forgiving. Where an impact on a fiberglass hull will result in major gelcoat damage and possible cracking, an aluminum hull will probably only have a scratch or a small bend. The only concern is electrolysis. Ensure that you have proper sacrificial anodes installed.


Interior

The boat is equipped with 8 berths and 400.0 liter fresh water capacity.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Mancini 40 Sloop is 1.84, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


EU classification

Mancini 40 Sloop holds a CE certification:

The boat is by European Union certified as Class A. OCEAN:
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Mancini 40 Sloop is about 307 kg/cm, alternatively 1719 lbs/inch.
Meaning: if you load 307 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1719 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Mancini 40 Sloop is 3.14.

Slim Wide 66% 0 50 100
Compared with other similar sailboats it is more spacy than 66% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 12.0 m(39.4 feet)14 mm(0.55 inch)
Genoa sheet 12.0 m(39.4 feet)14 mm(0.55 inch)
Mainsheet 30.0 m(98.4 feet)14 mm(0.55 inch)
Spinnaker sheet26.4 m(86.6 feet)14 mm(0.55 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Mancini 40 Sloop it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References