YachtDatabase.com

Review of C&C 38


Basic specs.

sail specifications
The C&C 38 aka C&C 38 Mk I is a sailboat designed by the maritime architect bureau Cuthbertson & Cassian. The C&C 38 is built by the American yard C&C Yachts.

Here we would have liked to show you nice photos of the C&C 38.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a C&C 38 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.


Rig
Rig
Rig of C&C 38 anno 1975. C&C 38 Mk I, SV SUPERSTITION taken in St. Margarets Bay, Nova Scotia, Canada 2020. Jack Barrett, owner and Skipper.

Keel
Keel
Keel of C&C 38 anno 1975. C&C 38 Mk I, SV SUPERSTITION, fin keel following a repair to the ´C&C Smile´

Unknown keel type

The boat can only enter major marinas as the draft is about 1.86 - 1.96 meter (6.10 - 6.40 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.3 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for C&C 38 is about 222 kg/cm, alternatively 1244 lbs/inch.
Meaning: if you load 222 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1244 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for C&C 38 is 3.09.

Slim Wide 66% 0 50 100
Compared with other similar sailboats it is more spacy than 66% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Ballast Ratio

What is a Ballast Ratio?

The ballast ratio for C&C 38 is 39%.

Low High 46% 0 50 100
This ballast ratio shows a righting moment that is higher than 46% of all similar sailboat designs. A righting moment (ability to resist heeling) just below average.


Over- / underrigged

Low High 66% 0 50 100
The C&C 38 has more rig than 66% of all similar sailboats, which indicates that the boat is slightly overrigged.


RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for C&C 38 is 58

Slow Fast 58% 0 50 100
The relative speed performance is 58 which means that a it is faster than 58% of all similar sailboat designs.


Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 37m2 (398 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 34.8 m(114.3 feet)12 mm(1/2 inch)
Jib/genoa halyard34.8 m(114.3 feet)12 mm(1/2 inch)
Spinnaker halyard34.8 m(114.3 feet)12 mm(1/2 inch)
Jib sheet 11.5 m(37.7 feet)14 mm(0.55 inch)
Genoa sheet11.5 m(37.7 feet)14 mm(0.55 inch)
Mainsheet 28.7 m(94.2 feet)14 mm(0.55 inch)
Spinnaker sheet25.3 m(82.9 feet)14 mm(0.55 inch)
Cunningham3.7 m(12.0 feet)12 mm(1/2 inch)
Kickingstrap7.3 m(24.0 feet)12 mm(1/2 inch)
Clew-outhaul7.3 m(24.0 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for C&C 38 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References