YachtDatabase.com

Review of Valk Continental II 23.00


Basic specs.

sail specifications
The Valk Continental II 23.00 is a large motorboat designed in the early 2010. The Valk Continental II 23.00 is built by the Dutch yard Van der Valk Shipyard B.V..

Here we would have liked to show you nice photos of the Valk Continental II 23.00.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Valk Continental II 23.00 or similar boat for sale

Hull

The hull is made of aluminium. Aluminum is strong and forgiving. Where an impact on a fiberglass hull will result in major gelcoat damage and possible cracking, an aluminum hull will probably only have a scratch or a small bend. The only concern is electrolysis. Ensure that you have proper sacrificial anodes installed.


Engine

The boat may be equipped with three inboard Volvo Penta engines at 600 hp (447 kW).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Valk Continental II 23.00 is about 870 kg/cm, alternatively 4874 lbs/inch.
Meaning: if you load 870 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 4874 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Valk Continental II 23.00 is 4.14.


Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 541 kW (725 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Valk Continental II 23.00 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References