The boat is equipped with 600.0 liter fresh water capacity.
The Uniesse 44 Fly has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with dual inboard Cummins diesel engines at 540 hp (402 kW). The speed is 33.0 knots.
Alternative 2:
Uniesse 44 Fly may be equipped with dual engines at 900 hp (670 kW). Max speed is 33.0 knots..
The fuel tank has a capacity of 1600.0 liters (422 US gallons, 351 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Uniesse 44 Fly is about 446 kg/cm, alternatively 2502 lbs/inch.
Meaning: if you load 446 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2502 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Uniesse 44 Fly is 3.15.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Uniesse 44 Fly it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.