YachtDatabase.com

Review of Océanis 42 CC


Basic specs.

sail specifications
The Océanis 42 CC is a large sailboat designed by the French maritime architect bureau Finot-Conq in the early 2000.

Here we would have liked to show you nice photos of the Océanis 42 CC.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find an Océanis 42 CC or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Keel

Unknown keel type

The boat can enter most marinas as the draft is just about 1.57 - 1.67 meter (5.15 - 5.45 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Océanis 42 CC is about 333 kg/cm, alternatively 1868 lbs/inch.
Meaning: if you load 333 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1868 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Océanis 42 CC is 3.26.

Slim Wide 58% 0 50 100
Compared with other similar sailboats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 33.0 m(108.4 feet)12 mm(1/2 inch)
Jib/genoa halyard33.0 m(108.4 feet)12 mm(1/2 inch)
Spinnaker halyard33.0 m(108.4 feet)12 mm(1/2 inch)
Jib sheet 12.7 m(41.8 feet)14 mm(0.55 inch)
Genoa sheet12.7 m(41.8 feet)14 mm(0.55 inch)
Mainsheet 31.9 m(104.5 feet)14 mm(0.55 inch)
Spinnaker sheet28.0 m(92.0 feet)14 mm(0.55 inch)
Cunningham5.8 m(19.0 feet)12 mm(1/2 inch)
Kickingstrap11.6 m(38.0 feet)12 mm(1/2 inch)
Clew-outhaul11.6 m(38.0 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Océanis 42 CC it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References