The boat is equipped with 100.0 liter fresh water capacity.
The Noblesse 30 has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with dual inboard Volvo Penta gasoline engines at 270 hp (201 kW). The speed is 42.0 knots.
The transmission is a Z-drive aka sterndrive.
Alternative 2:
Noblesse 30 may be equipped with a Turbo D engine at 460 hp (342 kW)..
The fuel tank has a capacity of 450.0 liters (118 US gallons, 98 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Noblesse 30 is about 167 kg/cm, alternatively 937 lbs/inch.
Meaning: if you load 167 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 937 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Noblesse 30 is 3.40.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Noblesse 30 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.