Review of Moody 47
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Moody 47 or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with 6-9 berths.
The Moody 47 has been built with different keel alternatives.
Unknown keel type
The boat can only enter major marinas as the draft is about 2.28 - 2.38 meter (7.48 - 7.78 ft) dependent on the load. See immersion rate below.
Fin keel
The Moody 47 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a full keel.
Moody 47 can only enter major marinas as the draft is about 2.06 - 2.16 meter (6.76 - 7.06 ft) dependent on the load. See immersion rate below.
The Moody 47 has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with an inboard Thornycroft diesel engine
Alternative 2:
The boat may be equipped with an inboard diesel engine at 60 hp (44 kW).
The transmission is a shaft drive. A shaft drive will in the long run require less maintenance than other types of drive e.g. a sail drive.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Moody 47 is 1.92, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Moody 47 is about 443 kg/cm, alternatively 2485 lbs/inch.
Meaning: if you load 443 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2485 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Moody 47 is 3.30.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Moody 47 with ISO 8666 reference sail is 17.1, with a 135% genua the SA/D is 20.3.
Maintenance
Dimensions of sail.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 42.5 m | (139.3 feet) | 14 mm | (0.55 inch) |
| Jib/genoa halyard | 42.5 m | (139.3 feet) | 14 mm | (0.55 inch) |
| Spinnaker halyard | 42.5 m | (139.3 feet) | 14 mm | (0.55 inch) |
| Jib sheet | 14.8 m | (48.5 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 14.8 m | (48.5 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 37.0 m | (121.3 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 32.5 m | (106.8 feet) | 16 mm | (5/8 inch) |
| Cunningham | 5.2 m | (17.0 feet) | 14 mm | (0.55 inch) |
| Kickingstrap | 10.4 m | (34.0 feet) | 14 mm | (0.55 inch) |
| Clew-outhaul | 10.4 m | (34.0 feet) | 14 mm | (0.55 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Moody 47 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.