Review of Manhattan 63
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Manhattan 63 or similar boat for sale
The hull is made of hand laid fibreglass. Generally, a hull made of hand laid fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with a galley, 816.0 liter fresh water capacity, toilet facility and 136.0 liter waste water capacity.
The Manhattan 63 has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with dual inboard Volvo Penta IPS engines
The transmission is a Z-drive aka sterndrive.
Alternative 2:
Manhattan 63 may be equipped with dual inboard Volvo Penta engines
The transmission is a shaft drive. A shaft drive will in the long run require less maintenance than other types of drive e.g. a sail drive.
The fuel tank has a capacity of 3500.0 liters (924 US gallons, 769 imperial gallons).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Manhattan 63 is about 724 kg/cm, alternatively 4055 lbs/inch.
Meaning: if you load 724 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 4055 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Manhattan 63 is 4.11.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
Curiosities
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
Danish definition of a powerboat
Though, if you install a motor of 446 kW (598 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'
Maintenance
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Manhattan 63 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.