The Jetten 50 Mpc has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with dual inboard Yanmar 6BY3-160 diesel engines
Alternative 2:
The boat may be equipped with dual inboard Cummins diesel engines at 380 hp (283 kW). Max speed is 14.0 knots.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Jetten 50 Mpc is about 496 kg/cm, alternatively 2782 lbs/inch.
Meaning: if you load 496 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2782 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Jetten 50 Mpc is 3.11.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Jetten 50 Mpc it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.