YachtDatabase.com

Review of First 28.5


Basic specs.

sail specifications
The First 28.5 is a sailboat designed in the late eighties. The First 28.5 is built by the French yard Bénéteau.

Here we would have liked to show you nice photos of the First 28.5.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a First 28.5 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 6.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for First 28.5 is about 147 kg/cm, alternatively 827 lbs/inch.
Meaning: if you load 147 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 827 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for First 28.5 is 2.88.

Slim Wide 73% 0 50 100
Compared with other similar sailboats it is more spacy than 73% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 25.8 m(84.7 feet)8 mm(5/16 inch)
Jib/genoa halyard25.8 m(84.7 feet)8 mm(5/16 inch)
Spinnaker halyard25.8 m(84.7 feet)8 mm(5/16 inch)
Jib sheet 8.6 m(28.2 feet)10 mm(3/8 inch)
Genoa sheet8.6 m(28.2 feet)10 mm(3/8 inch)
Mainsheet 21.5 m(70.5 feet)10 mm(3/8 inch)
Spinnaker sheet18.9 m(62.1 feet)10 mm(3/8 inch)
Cunningham3.4 m(11.0 feet)8 mm(5/16 inch)
Kickingstrap6.7 m(22.0 feet)8 mm(5/16 inch)
Clew-outhaul6.7 m(22.0 feet)8 mm(5/16 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for First 28.5 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References