Review of Cyclades 39.3
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Cyclades 39.3 or similar boat for sale
The Cyclades 39.3 is built with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.
Unknown keel type
The boat can only enter major marinas as the draft is about 1.91 - 2.01 meter (6.27 - 6.57 ft) dependent on the load.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Cyclades 39.3 is 2.07, indicating that this boat would not be accepted to participate in ocean races.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Cyclades 39.3 is 2.96.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Cyclades 39.3 with ISO 8666 reference sail is 16.3, with a 135% genua the SA/D is 19.1.
Maintenance
When buying anti-fouling bottom paint, it's nice to know how much to buy.
The surface of the wet bottom is about 46m2 (495 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.
Note: If you use a paint roller you will need more paint than if you use a paintbrush.
Dimensions of sail for fractional rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 34.5 m | (113.4 feet) | 12 mm | (1/2 inch) |
| Jib/genoa halyard | 34.5 m | (113.4 feet) | 12 mm | (1/2 inch) |
| Spinnaker halyard | 34.5 m | (113.4 feet) | 12 mm | (1/2 inch) |
| Jib sheet | 11.7 m | (38.4 feet) | 14 mm | (0.55 inch) |
| Genoa sheet | 11.7 m | (38.4 feet) | 14 mm | (0.55 inch) |
| Mainsheet | 29.3 m | (96.0 feet) | 14 mm | (0.55 inch) |
| Spinnaker sheet | 25.8 m | (84.5 feet) | 14 mm | (0.55 inch) |
| Cunningham | 4.6 m | (15.1 feet) | 12 mm | (1/2 inch) |
| Kickingstrap | 9.2 m | (30.2 feet) | 12 mm | (1/2 inch) |
| Clew-outhaul | 9.2 m | (30.2 feet) | 12 mm | (1/2 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Cyclades 39.3 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.