YachtDatabase.com

Review of Cranchi E30 Endurance


Basic specs.

sail specifications
The Cranchi E30 Endurance aka Endurance E30 is a motorboat designed by the maritime architect Aldo Cranchi. The Cranchi E30 Endurance is built by the Italian yard Cranchi.

Here we would have liked to show you nice photos of the Cranchi E30 Endurance.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Cranchi E30 Endurance or similar boat for sale

Hull

Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.


Interior

The boat is equipped with one cabin, 4 berths, 70.0 liter fresh water capacity and toilet facility.


Engine

The Cranchi E30 Endurance has been equipped with different engine alternatives.

Alternative 1:

The boat may be equipped with an inboard Volvo Penta D4 diesel engine at 320 hp (238 kW). Cruise speed is 34.0 knots.

The transmission is a Z-drive aka sterndrive.

Alternative 2:

Cranchi E30 Endurance may be equipped with an inboard Volvo Penta gasoline engine at 350 hp (260 kW).

The fuel tank has a capacity of 326.0 liters (86 US gallons, 71 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Cranchi E30 Endurance holds two CE certifications:

If less than 8 in on board the boat is by European Union certified as Class B. OFFSHORE:
Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.

If less than 12 in on board the boat is by European Union certified as Class C. INSHORE:
Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 (Beaufort scale) and significant wave heights up to, and including, 2 m may be experienced.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Cranchi E30 Endurance is about 194 kg/cm, alternatively 1090 lbs/inch.
Meaning: if you load 194 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1090 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Cranchi E30 Endurance is 3.01.

Slim Wide 50% 0 50 100
Compared with other similar motor boats it is more spacy than 50% of all other designs. It seems that the designer has chosen an average hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is categorized as a Powerboat.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Cranchi E30 Endurance it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References