YachtDatabase.com

Review of Windy 52 Xanthos


Basic specs.

sail specifications
The Windy 52 Xanthos is a large motorboat designed by the maritime architect Hans Jørgen Johnsen. The Windy 52 Xanthos is built by the Norwegian yard Windy Boats AS.

Here we would have liked to show you nice photos of the Windy 52 Xanthos.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Windy 52 Xanthos or similar boat for sale

Hull

Both the hull and the deck is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Both the hull and the deck is a sandwich construction which improves the indoor climate. Especially when the water is colder than the air in the cabin, then the double hull insulates against cold water and reduce the condense water in the cabin. The core material in the sandwich construction is PVC foam.PVC foam core is a synthetic material which offers excellent mechanical properties and low weight. It is widely used and has a proven track record in marine sandwich composites.


Interior

The boat is equipped with 6 berths, a galley and 470.0 liter fresh water capacity.


Engine

The boat may be equipped with dual inboard Volvo Penta diesel engines at 575 hp (428 kW).

The fuel tank has a capacity of 2000.0 liters (528 US gallons, 439 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Windy 52 Xanthos holds a CE certification:

The boat is by European Union certified as Class A. OCEAN:
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Windy 52 Xanthos is about 465 kg/cm, alternatively 2608 lbs/inch.
Meaning: if you load 465 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2608 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Windy 52 Xanthos is 3.59.

Wide Slim 58% 0 50 100
Compared with other similar motor boats it is slimmer than 58% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is categorized as a Powerboat.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Windy 52 Xanthos it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References