The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
CentreBoard
The Herreshoff Scout is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.
The keel is made of lead. Compared with iron, lead has the advantage of being 44% heavier, which allows a smaller keel and hence less water resistance and higher speed.
The boat can enter even shallow marinas as the draft is just about 0.59 - 0.69 meter (1.94 - 2.24 ft) dependent on the load. See immersion rate below.
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Herreshoff Scout is 2.54, indicating that this boat would not be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 5.7 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Herreshoff Scout is about 88 kg/cm, alternatively 497 lbs/inch.
Meaning: if you load 88 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 497 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Herreshoff Scout is 10.7.
What is L/B (Length Beam Ratio)?
The l/b ratio for Herreshoff Scout is 2.27.
The ballast ratio for Herreshoff Scout is 10%.
What is Displacement Length Ratio?
The DL-ratio for Herreshoff Scout is 157 which categorizes this boat among 'light racers'.
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
Usage | Length | Diameter | ||
---|---|---|---|---|
Jib sheet | 5.5 m | (18.2 feet) | 8 mm | (5/16 inch) |
Genoa sheet | 5.5 m | (18.2 feet) | 8 mm | (5/16 inch) |
Mainsheet | 13.8 m | (45.4 feet) | 8 mm | (5/16 inch) |
Spinnaker sheet | 12.2 m | (40.0 feet) | 8 mm | (5/16 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Herreshoff Scout it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.