Review of Sunbeam 42.1
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Sunbeam 42.1 or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with 4+2 berths.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Sunbeam 42.1 is 1.83, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
Sunbeam 42.1 holds a CE certification:
The boat is by European Union certified as Class A. OCEAN:What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 8.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Sunbeam 42.1 is about 333 kg/cm, alternatively 1866 lbs/inch.
Meaning: if you load 333 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1866 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Sunbeam 42.1 is 28.2.
What is L/B (Length Beam Ratio)?
The l/b ratio for Sunbeam 42.1 is 3.17.
What is Displacement Length Ratio?
The DL-ratio for Sunbeam 42.1 is 149 which categorizes this boat among 'ultra light racers'.
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
|---|---|---|---|---|
| Jib sheet | 12.6 m | (41.3 feet) | 14 mm | (0.55 inch) |
| Genoa sheet | 12.6 m | (41.3 feet) | 14 mm | (0.55 inch) |
| Mainsheet | 31.5 m | (103.3 feet) | 14 mm | (0.55 inch) |
| Spinnaker sheet | 27.7 m | (90.9 feet) | 14 mm | (0.55 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Sunbeam 42.1 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.