Review of Bavaria 46 Exclusive
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Bavaria 46 Exclusive or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The interior is like many other boats made of mahogany. Mahogany belongs to the hardwood species, known for being water-repellent and resistant to decay. It has an attractive wood grain and holds wood polish and varnish well.
The boat is equipped with 0 cabins, 10 berths, a galley, 610.0 liter fresh water capacity and toilet facility.
The Bavaria 46 Exclusive is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.
Fin keel
The Bavaria 46 Exclusive is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a full keel.
The keel is made of lead. Compared with iron, lead has the advantage of being 44% heavier, which allows a smaller keel and hence less water resistance and higher speed.
The boat can only enter major marinas as the draft is about 2.10 - 2.20 meter (6.89 - 7.19 ft) dependent on the load. See immersion rate below.
Bavaria 46 Exclusive may be equipped with an inboard Volvo Penta engine at 59 hp (43 kW).
The fuel tank has a capacity of 260.0 liters (68 US gallons, 57 imperial gallons).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Bavaria 46 Exclusive is 2.00, indicating that this boat would not be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Bavaria 46 Exclusive is about 434 kg/cm, alternatively 2433 lbs/inch.
Meaning: if you load 434 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2433 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Bavaria 46 Exclusive is 3.23.
The ballast ratio for Bavaria 46 Exclusive is 49%.
Maintenance
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Jib sheet | 14.5 m | (47.5 feet) | 16 mm | (5/8 inch) |
| Genoa sheet | 14.5 m | (47.5 feet) | 16 mm | (5/8 inch) |
| Mainsheet | 36.2 m | (118.8 feet) | 16 mm | (5/8 inch) |
| Spinnaker sheet | 31.9 m | (104.5 feet) | 16 mm | (5/8 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Bavaria 46 Exclusive it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.