Review of Bénéteau 411
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Bénéteau 411 or similar boat for sale
The Bénéteau 411 is equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.
Unknown keel type
The boat can enter even shallow marinas as the draft is just about 1.45 - 1.55 meter (4.76 - 5.06 ft) dependent on the load. See immersion rate below.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Bénéteau 411 is 2.01, indicating that this boat would not be accepted to participate in ocean races.
What is Theoretical Maximum Hull Speed?
The theoretical maximal speed of a displacement boat of this length is 8.0 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Bénéteau 411 is about 291 kg/cm, alternatively 1634 lbs/inch.
Meaning: if you load 291 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1634 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is Motion Comfort Ratio (MCR)?
The Motion Comfort Ratio for Bénéteau 411 is 23.0.
What is L/B (Length Beam Ratio)?
The l/b ratio for Bénéteau 411 is 3.21.
The ballast ratio for Bénéteau 411 is 32%.
What is Displacement Length Ratio?
The DL-ratio for Bénéteau 411 is 163 which categorizes this boat among 'light racers'.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Bénéteau 411 with ISO 8666 reference sail is 16.7, with a 135% genua the SA/D is 20.0.
Maintenance
When buying anti-fouling bottom paint, it's nice to know how much to buy.
The surface of the wet bottom is about 45m2 (484 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.
Note: If you use a paint roller you will need more paint than if you use a paintbrush.
Dimensions of sail for masthead rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 32.9 m | (108.1 feet) | 12 mm | (1/2 inch) |
| Jib/genoa halyard | 32.9 m | (108.1 feet) | 12 mm | (1/2 inch) |
| Spinnaker halyard | 32.9 m | (108.1 feet) | 12 mm | (1/2 inch) |
| Jib sheet | 12.7 m | (41.7 feet) | 14 mm | (0.55 inch) |
| Genoa sheet | 12.7 m | (41.7 feet) | 14 mm | (0.55 inch) |
| Mainsheet | 31.8 m | (104.2 feet) | 14 mm | (0.55 inch) |
| Spinnaker sheet | 27.9 m | (91.7 feet) | 14 mm | (0.55 inch) |
| Cunningham | 4.5 m | (14.8 feet) | 12 mm | (1/2 inch) |
| Kickingstrap | 9.0 m | (29.7 feet) | 12 mm | (1/2 inch) |
| Clew-outhaul | 9.0 m | (29.7 feet) | 12 mm | (1/2 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Bénéteau 411 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.