YachtDatabase.com

Review of Golden Hind 32


Golden Hind 32
Golden Hind 32 anno 1969.

Basic specs.

sail specifications
The Golden Hind 32 is a sailboat designed by the British maritime architect Maurice Walter Griffiths.

Looking for a new boat? Find a Golden Hind 32 or similar boat for sale

Hull

The hull is made of plywood.


Interior

The boat is equipped with 2 cabins, 5 berths, a galley and toilet facility.


Keel

Unknown keel type

The boat can enter even shallow marinas as the draft is just about 1.12 - 1.22 meter (3.67 - 3.97 ft) dependent on the load. See immersion rate below.


Engine

Golden Hind 32 is typically equipped with an inboard Beta BD722 diesel engine


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Golden Hind 32 is 1.59, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Golden Hind 32 is about 180 kg/cm, alternatively 1012 lbs/inch.
Meaning: if you load 180 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1012 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Golden Hind 32 is 3.59.

Wide Slim 85% 0 50 100
Compared with other similar sailboats it is slimmer than 85% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 9.8 m(32.3 feet)12 mm(1/2 inch)
Genoa sheet 9.8 m(32.3 feet)12 mm(1/2 inch)
Mainsheet 24.6 m(80.8 feet)12 mm(1/2 inch)
Spinnaker sheet21.7 m(71.1 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Golden Hind 32 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References