Review of Sagawind 20

Basic specs.

The Sagawind 20 aka Sunwind 20 is a small sailboat designed by the Swedish maritime architect Tord Arne Sundén.

Here we would have liked to show you nice photos of the Sagawind 20.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Sagawind 20 or similar boat for sale

Keel

Unknown keel type

The boat can enter even shallow marinas as the draft is just about 1.20 - 1.30 meter (3.94 - 4.24 ft) dependent on the load. See immersion rate below.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Sagawind 20 is 2.09, indicating that this boat would not be accepted to participate in ocean races.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Sagawind 20 is about 98 kg/cm, alternatively 551 lbs/inch.
Meaning: if you load 98 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 551 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Sagawind 20 is 2.45.

Compared with other similar sailboats it is more spacy than 76% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.

SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for Sagawind 20 with ISO 8666 reference sail is 11.5, with a 135% genua the SA/D is 13.4.

The SA/D ratio indicates that it is faster than 4% of all similar sailboat designs in light wind.

RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Sagawind 20 is 34

The relative speed performance is 34 which means that a it is faster than 34% of all similar sailboat designs.

Maintenance

Rig

Dimensions of sail.

Are your sails worn out? You might find your next sail here: Sails for Sale

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Mainsail halyard	20.3 m	(66.6 feet)	6 mm	(1/4 inch)
Jib/genoa halyard	20.3 m	(66.6 feet)	6 mm	(1/4 inch)
Spinnaker halyard	20.3 m	(66.6 feet)	6 mm	(1/4 inch)
Jib sheet	6.0 m	(19.7 feet)	8 mm	(5/16 inch)
Genoa sheet	6.0 m	(19.7 feet)	8 mm	(5/16 inch)
Mainsheet	15.0 m	(49.2 feet)	8 mm	(5/16 inch)
Spinnaker sheet	13.2 m	(43.3 feet)	8 mm	(5/16 inch)
Cunningham	2.2 m	(7.2 feet)	6 mm	(1/4 inch)
Kickingstrap	4.4 m	(14.4 feet)	6 mm	(1/4 inch)
Clew-outhaul	4.4 m	(14.4 feet)	6 mm	(1/4 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Sagawind 20 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.