YachtDatabase.com

Review of C&C 35


Basic specs.

sail specifications
The C&C 35 is a sailboat designed by the maritime architect bureau Cuthbertson & Cassian.

Here we would have liked to show you nice photos of the C&C 35.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a C&C 35 or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Keel

Unknown keel type

The boat can enter most marinas as the draft is just about 1.60 - 1.70 meter (5.25 - 5.55 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for C&C 35 is 1.94, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for C&C 35 is about 228 kg/cm, alternatively 1277 lbs/inch.
Meaning: if you load 228 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1277 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for C&C 35 is 3.26.

Wide Slim 54% 0 50 100
Compared with other similar sailboats it is slimmer than 54% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


SA/D (Sail Area Displacement ratio)

What is SA/D (Sail Area Displacement ratio)?

The SA/D for C&C 35 with ISO 8666 reference sail is 19.5, with a 135% genua the SA/D is 23.3.

Low High 85% 0 50 100
The SA/D ratio indicates that it is faster than 85% of all similar sailboat designs in light wind.


Maintenance

Rig

Dimensions of sail.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 30.2 m(99.2 feet)12 mm(1/2 inch)
Jib/genoa halyard30.2 m(99.2 feet)12 mm(1/2 inch)
Spinnaker halyard30.2 m(99.2 feet)12 mm(1/2 inch)
Jib sheet 10.5 m(34.6 feet)14 mm(0.55 inch)
Genoa sheet10.5 m(34.6 feet)14 mm(0.55 inch)
Mainsheet 26.3 m(86.5 feet)14 mm(0.55 inch)
Spinnaker sheet23.2 m(76.1 feet)14 mm(0.55 inch)
Cunningham4.2 m(13.6 feet)12 mm(1/2 inch)
Kickingstrap8.3 m(27.2 feet)12 mm(1/2 inch)
Clew-outhaul8.3 m(27.2 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for C&C 35 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References