YachtDatabase.com

Review of Bayliner 2955 Avanti Sunbridge


Basic specs.

sail specifications
The Bayliner 2955 Avanti Sunbridge is a motorboat designed in the early nineties. The Bayliner 2955 Avanti Sunbridge is built by the American yard Bayliner.

Here we would have liked to show you nice photos of the Bayliner 2955 Avanti Sunbridge.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Bayliner 2955 Avanti Sunbridge or similar boat for sale

Hull

Both the hull and the deck is made of hand laid fibreglass. Generally, a hull made of hand laid fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.

Both the hull and the deck is a sandwich construction which improves the indoor climate. Especially when the water is colder than the air in the cabin, then the double hull insulates against cold water and reduce the condense water in the cabin.


Interior

The interior is like few other boats made in fibreglass.
The boat is equipped with 3 cabins, 6 berths, a galley, 113.0 liter fresh water capacity, toilet facility and 102.0 liter waste water capacity.


Engine

The boat may be equipped with dual inboard MerCruiser engines at 520 hp (387 kW). Max speed is 40.0 knots.

The transmission is a Z-drive aka sterndrive.

The fuel tank, which is made of stainless steel, has a capacity of 454.0 liters (119 US gallons, 99 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Bayliner 2955 Avanti Sunbridge is about 187 kg/cm, alternatively 1052 lbs/inch.
Meaning: if you load 187 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1052 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Bayliner 2955 Avanti Sunbridge is 2.72.

Slim Wide 88% 0 50 100
Compared with other similar motor boats it is more spacy than 88% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is categorized as a Powerboat.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Bayliner 2955 Avanti Sunbridge it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References