The boat is equipped with 3000.0 liter fresh water capacity.
The boat may be equipped with dual inboard MTU engines at 4570 hp (3404 kW). Max speed is 31.0 knots.
The fuel tank has a capacity of 10000.0 liters (2641 US gallons, 2199 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Antago Yachts 90 is about 1166 kg/cm, alternatively 6531 lbs/inch.
Meaning: if you load 1166 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 6531 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Antago Yachts 90 is 4.25.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Antago Yachts 90 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.