Review of Scand 25 Classic
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Scand 25 Classic or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The boat is equipped with 5 berths, a galley, 90.0 liter fresh water capacity, toilet facility and 75.0 liter waste water capacity.
Unknown keel type
The boat can enter even shallow marinas as the draft is just about 0.65 - 0.75 meter (2.13 - 2.43 ft) dependent on the load. See immersion rate below.
The Scand 25 Classic has been equipped with different engine alternatives.
Alternative 1:
Scand 25 Classic may be equipped with an inboard Yanmar 4JH3E diesel engine
Alternative 2:
The boat may be equipped with an inboard Bukh DV20 diesel engine at 20 hp (14 kW).
The fuel tank has a capacity of 180.0 liters (47 US gallons, 39 imperial gallons).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Scand 25 Classic is about 146 kg/cm, alternatively 820 lbs/inch.
Meaning: if you load 146 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 820 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Scand 25 Classic is 2.66.
Curiosities
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
Danish definition of a powerboat
Though, if you install a motor of 61 kW (81 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'
Maintenance
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Scand 25 Classic it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.