YachtDatabase.com

Review of Blue Jay


Basic specs.

sail specifications
The Blue Jay is a small sailing dinghy designed by the American maritime architect bureau Sparkman & Stephens in the late forties. Several thousand boats have been produced.

Here we would have liked to show you nice photos of the Blue Jay.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Blue Jay or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
Some boats has a hull made of Wood.


Rig

The Blue Jay is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.


Keel

The Blue Jay has been built with different keel alternatives.

DaggerBoard aka Sword

The Blue Jay is equipped with a daggerboard keel. A daggerboard is a lifting keel that can be lowered and raised, allowing the boat to enter shallow waters as well.

The boat can sail close to the beach as the draft is just 0.15 - 0.25 meter (0.49 - 0.79 ft) dependent of the load. See immersion rate below.

CentreBoard

The Blue Jay is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.

The boat can sail close to the beach as the draft is just 0.15 - 0.25 meter (0.49 - 0.79 ft) dependent of the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Blue Jay is about 33 kg/cm, alternatively 190 lbs/inch.
Meaning: if you load 33 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 190 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Blue Jay is 2.62.

Slim Wide 50% 0 50 100
Compared with other similar dinghies it is more spacy than 50% of all other designs. It seems that the designer has chosen an average hull design.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Blue Jay it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References