Review of 15 m Vertens

Basic specs.

The 15 m Vertens is a large motorboat designed by the German maritime architect F. Vertens together with J. Beiderbeck. The 15 m Vertens is built by the German yard Ostsee-Werft.

Here we would have liked to show you nice photos of the 15 m Vertens.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a 15 m Vertens or similar boat for sale

Hull

The hull is made of plywood.

Interior

The boat is equipped with 7 berths, a galley and toilet facility.

Engine

The boat may be equipped with an engine at 837 hp (623 kW)..

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for 15 m Vertens is about 471 kg/cm, alternatively 2640 lbs/inch.
Meaning: if you load 471 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2640 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for 15 m Vertens is 3.33.

Compared with other similar motor boats it is more spacy than 66% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Danish definition of a powerboat

According to this definition this boat is categorized as a Powerboat.

Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for 15 m Vertens it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.