Review of Lohi 17
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Lohi 17 or similar boat for sale
The boat is equipped with 4 berths.
DaggerBoard
The Lohi 17 is equipped with a daggerboard keel. A daggerboard is a lifting keel that can be lowered and raised, allowing the boat to enter shallow waters as well.
The boat can enter even shallow marinas as the draft is just about 0.50 - 0.60 meter (1.64 - 1.94 ft) dependent on the load. See immersion rate below.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Lohi 17 is 2.58, indicating that this boat would not be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Lohi 17 is about 70 kg/cm, alternatively 395 lbs/inch.
Meaning: if you load 70 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 395 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Lohi 17 is 2.63.
The ballast ratio for Lohi 17 is 29%.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Lohi 17 with ISO 8666 reference sail is 19.6, with a 135% genua the SA/D is 22.4.
What is Relative Speed Performance?
The Relative Speed Performance for Lohi 17 is 66
Maintenance
Dimensions of sail.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 16.4 m | (53.9 feet) | 6 mm | (1/4 inch) |
| Jib/genoa halyard | 16.4 m | (53.9 feet) | 6 mm | (1/4 inch) |
| Spinnaker halyard | 16.4 m | (53.9 feet) | 6 mm | (1/4 inch) |
| Jib sheet | 5.3 m | (17.3 feet) | 8 mm | (5/16 inch) |
| Genoa sheet | 5.3 m | (17.3 feet) | 8 mm | (5/16 inch) |
| Mainsheet | 13.2 m | (43.2 feet) | 8 mm | (5/16 inch) |
| Spinnaker sheet | 11.6 m | (38.0 feet) | 8 mm | (5/16 inch) |
| Cunningham | 2.4 m | (7.7 feet) | 6 mm | (1/4 inch) |
| Kickingstrap | 4.7 m | (15.4 feet) | 6 mm | (1/4 inch) |
| Clew-outhaul | 4.7 m | (15.4 feet) | 6 mm | (1/4 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Lohi 17 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.