The hull is made of aluminium. Aluminum is strong and forgiving. Where an impact on a fiberglass hull will result in major gelcoat damage and possible cracking, an aluminum hull will probably only have a scratch or a small bend. The only concern is electrolysis. Ensure that you have proper sacrificial anodes installed.
The boat is equipped with 6-8 berths, a galley and toilet facility.
Unknown keel type
The boat can enter even shallow marinas as the draft is just about 0.83 - 0.93 meter (2.72 - 3.02 ft) dependent on the load. See immersion rate below.
Cascaruda 43 AL may be equipped with dual engines at 530 hp (395 kW)..
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Cascaruda 43 AL is about 380 kg/cm, alternatively 2129 lbs/inch.
Meaning: if you load 380 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2129 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Cascaruda 43 AL is 2.93.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Cascaruda 43 AL it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.