The boat is equipped with 500.0 liter fresh water capacity.
The boat may be equipped with dual inboard Caterpillar diesel engines at 870 hp (648 kW). Max speed is 30.0 knots.
The fuel tank has a capacity of 1600.0 liters (422 US gallons, 351 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for ARS Monaco RS 43 is about 433 kg/cm, alternatively 2429 lbs/inch.
Meaning: if you load 433 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2429 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for ARS Monaco RS 43 is 3.67.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for ARS Monaco RS 43 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.