The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with 6 berths and 550.0 liter fresh water capacity.
The boat may be equipped with dual inboard Volvo Penta engines at 715 hp (532 kW). The speed is 30.0 knots.
The fuel tank has a capacity of 2200.0 liters (581 US gallons, 483 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Galeon 530 HT holds a CE certification:
The boat is by European Union certified as Class A. OCEAN:The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Galeon 530 HT is about 510 kg/cm, alternatively 2856 lbs/inch.
Meaning: if you load 510 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2856 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Galeon 530 HT is 3.45.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Galeon 530 HT it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.