Review of Brightlingsea One Design

Basic specs.

The Brightlingsea One Design aka Brightlingsea OD is a small sailing dinghy designed by the maritime architect Robert Stone in the late twenties. Less than 100 boats have been produced. The Brightlingsea One Design is built by the British yard D. Stone & Sons.

Here we would have liked to show you nice photos of the Brightlingsea One Design.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Brightlingsea One Design or similar boat for sale

Hull

The hull is made of wood.

Rig

The Brightlingsea One Design is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.

Keel

CentreBoard

The Brightlingsea One Design is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.

The boat can sail close to the beach as the draft is just 0.27 - 0.37 meter (0.89 - 1.19 ft) dependent of the load. See immersion rate below.

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Brightlingsea One Design is about 68 kg/cm, alternatively 385 lbs/inch.
Meaning: if you load 68 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 385 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Brightlingsea One Design is 2.94.

Compared with other similar dinghies it is slimmer than 76% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.

Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Brightlingsea One Design it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.