YachtDatabase.com

Review of Ancora 52 Seaking


Basic specs.

sail specifications
The Ancora 52 Seaking is a large motorboat. The Ancora 52 Seaking is built by the German yard Ancora Werft GmbH.

Here we would have liked to show you nice photos of the Ancora 52 Seaking.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find an Ancora 52 Seaking or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Interior

The boat is equipped with 8 berths, a galley and toilet facility.


Engine

The Ancora 52 Seaking has been equipped with different engine alternatives.

Alternative 1:

The boat may be equipped with an inboard MAN V10 diesel engine at 330 hp (245 kW).

Alternative 2:

Ancora 52 Seaking may be equipped with dual engines at 592 hp (441 kW)..


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Ancora 52 Seaking is about 486 kg/cm, alternatively 2726 lbs/inch.
Meaning: if you load 486 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 2726 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Ancora 52 Seaking is 3.43.

Slim Wide 58% 0 50 100
Compared with other similar motor boats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 252 kW (338 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Ancora 52 Seaking it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References