The hull is made of hand laid fibreglass while the deck is made of fibreglass. Generally, a hull made of hand laid fibreglass requires only a minimum of maintenance during the sailing season.
The Princess 415 has been equipped with different engine alternatives.
Alternative 1:
The boat may be equipped with dual inboard Volvo Penta TAMD 71B diesel engines at 380 hp (283 kW).
Alternative 2:
The boat may be equipped with dual inboard Volvo Penta TAMD 61 diesel engines at 306 hp (227 kW).
Alternative 3:
Princess 415 may be equipped with dual inboard Caterpillar 3208 diesel engines at 375 hp (279 kW).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Princess 415 is about 377 kg/cm, alternatively 2115 lbs/inch.
Meaning: if you load 377 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2115 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Princess 415 is 2.92.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Princess 415 (1985) it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.