Review of Palmer Johnson 43 CR

Basic specs.

The Palmer Johnson 43 CR aka Amphitrite 43 is a large sailboat designed by the maritime architect Donald Pye in the mid seventies. The Palmer Johnson 43 CR is built by the French yard Henri Wauquiez.

Here we would have liked to show you nice photos of the Palmer Johnson 43 CR.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Palmer Johnson 43 CR or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Engine

The boat may be equipped with an inboard Perkins engine

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Palmer Johnson 43 CR is 1.81, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.

Theoretical Maximum Hull Speed

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.8 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Palmer Johnson 43 CR is about 289 kg/cm, alternatively 1619 lbs/inch.
Meaning: if you load 289 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1619 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Palmer Johnson 43 CR is 3.12.

Compared with other similar sailboats it is more spacy than 76% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.

D/L (Displacement Length Ratio)

What is Displacement Length Ratio?

The DL-ratio for Palmer Johnson 43 CR is 312 which categorizes this boat among 'medium weight cruisers'.

18% of all similar sailboat designs are categorized as heavier. A heavy displacement combined with smaller water plane area has lower acceleration and is more comfortable.

Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Jib sheet	13.0 m	(42.7 feet)	16 mm	(5/8 inch)
Genoa sheet	13.0 m	(42.7 feet)	16 mm	(5/8 inch)
Mainsheet	32.6 m	(106.9 feet)	16 mm	(5/8 inch)
Spinnaker sheet	28.7 m	(94.0 feet)	16 mm	(5/8 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Palmer Johnson 43 CR it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.