YachtDatabase.com

Review of First 25-J


Basic specs.

sail specifications
The First 25-J also known as Beneteau First 25-J is a sailboat designed by the French maritime architect bureau Groupe Finot. The First 25-J is built by the French yard Bénéteau.

Here we would have liked to show you nice photos of the First 25-J.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a First 25-J or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.


Keel

Unknown keel type

The boat can enter even shallow marinas as the draft is just about 1.39 - 1.49 meter (4.56 - 4.86 ft) dependent on the load. See immersion rate below.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for First 25-J is about 148 kg/cm, alternatively 830 lbs/inch.
Meaning: if you load 148 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 830 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for First 25-J is 2.88.

Slim Wide 69% 0 50 100
Compared with other similar sailboats it is more spacy than 69% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 8.0 m(26.2 feet)10 mm(3/8 inch)
Genoa sheet 8.0 m(26.2 feet)10 mm(3/8 inch)
Mainsheet 20.0 m(65.5 feet)10 mm(3/8 inch)
Spinnaker sheet17.6 m(57.7 feet)10 mm(3/8 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for First 25-J it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References