YachtDatabase.com

Review of C Scow


Basic specs.

sail specifications
The C Scow is a small sailboat designed in the first decade of 1900. The C Scow is built by the American yard Johnson Boat Works.

Here we would have liked to show you nice photos of the C Scow.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a C Scow or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
Some boats has a hull made of Wood.


Keel

CentreBoard

The C Scow is equipped with a centreboard keel. A centreboard keel is a pivoting lifting keel, allowing to sail both coastal and inland waters.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for C Scow is 3.23, indicating that this boat would not be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for C Scow is about 87 kg/cm, alternatively 487 lbs/inch.
Meaning: if you load 87 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 487 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for C Scow is 2.86.

Wide Slim 69% 0 50 100
Compared with other similar sailboats it is slimmer than 69% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


SA/D (Sail Area Displacement ratio)

SA/D (Sail Area Displacement ratio)
Indicates how fast the boat is in light wind:
- Cruising Boats have ratios 10-15
- Cruiser-Racers have ratios 16-20
- Racers have ratios above 20
- High-Performance Racers have ratios above 24
Sail-area/displacement ratio (SA/D ratio): 46.05


Maintenance

Rig

Dimensions of sail.

mainsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 21.9 m(71.8 feet)6 mm(1/4 inch)
Jib/genoa halyard21.9 m(71.8 feet)6 mm(1/4 inch)
Spinnaker halyard21.9 m(71.8 feet)6 mm(1/4 inch)
Jib sheet 6.1 m(20.0 feet)8 mm(5/16 inch)
Genoa sheet6.1 m(20.0 feet)8 mm(5/16 inch)
Mainsheet 15.2 m(50.0 feet)8 mm(5/16 inch)
Spinnaker sheet13.4 m(44.0 feet)8 mm(5/16 inch)
Cunningham4.9 m(16.0 feet)6 mm(1/4 inch)
Kickingstrap9.8 m(32.0 feet)6 mm(1/4 inch)
Clew-outhaul9.8 m(32.0 feet)6 mm(1/4 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for C Scow it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References