Review of Bavaria 960
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Bavaria 960 or similar boat for sale
The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season. And outside the sailing season, just bottom cleaning and perhaps anti-fouling painting once a year - a few hours of work, that's all.
The boat is equipped with 7 berths.
The Bavaria 960 is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.
Fin keel
The Bavaria 960 is equipped with a fin keel. A boat with a fin keel is more manoeuvrable but has less directional stability than a similar boat with a full keel.
The boat can enter most marinas as the draft is just about 1.68 - 1.78 meter (5.51 - 5.81 ft) dependent on the load. See immersion rate below.
Bavaria 960 may be equipped with an inboard Volvo Penta diesel engine at 18 hp (13 kW).
The transmission is a saildrive.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
What is Capsize Screening Formula (CSF)?
The capsize screening value for Bavaria 960 is 1.97, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Bavaria 960 is about 192 kg/cm, alternatively 1080 lbs/inch.
Meaning: if you load 192 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1080 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Bavaria 960 is 3.20.
The ballast ratio for Bavaria 960 is 33%.
What is SA/D (Sail Area Displacement ratio)?
The SA/D for Bavaria 960 with ISO 8666 reference sail is 15.8, with a 135% genua the SA/D is 18.3.
Maintenance
Dimensions of sail for fractional rig.
Are your sails worn out? You might find your next sail here: Sails for Sale
If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.
| Usage | Length | Diameter | ||
| Mainsail halyard | 28.6 m | (94.0 feet) | 10 mm | (3/8 inch) |
| Jib/genoa halyard | 28.6 m | (94.0 feet) | 10 mm | (3/8 inch) |
| Spinnaker halyard | 28.6 m | (94.0 feet) | 10 mm | (3/8 inch) |
| Jib sheet | 9.6 m | (31.5 feet) | 12 mm | (1/2 inch) |
| Genoa sheet | 9.6 m | (31.5 feet) | 12 mm | (1/2 inch) |
| Mainsheet | 24.0 m | (78.7 feet) | 12 mm | (1/2 inch) |
| Spinnaker sheet | 21.1 m | (69.3 feet) | 12 mm | (1/2 inch) |
| Cunningham | 3.5 m | (11.6 feet) | 10 mm | (3/8 inch) |
| Kickingstrap | 7.1 m | (23.2 feet) | 10 mm | (3/8 inch) |
| Clew-outhaul | 7.1 m | (23.2 feet) | 10 mm | (3/8 inch) |
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Bavaria 960 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.