YachtDatabase.com

Review of Bénéteau Cyclades 39.3


Basic specs.

sail specifications
The Bénéteau Cyclades 39.3 is a sailboat. The Bénéteau Cyclades 39.3 is built by the French yard Bénéteau.

Here we would have liked to show you nice photos of the Bénéteau Cyclades 39.3.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Bénéteau Cyclades 39.3 or similar boat for sale

Rig

The Bénéteau Cyclades 39.3 is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.


Keel

Unknown keel type

The boat can only enter major marinas as the draft is about 1.91 - 2.01 meter (6.27 - 6.57 ft) dependent on the load.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Sorry, we have no sailing characteristics available for this boat.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Bénéteau Cyclades 39.3 is 2.96.

Slim Wide 79% 0 50 100
Compared with other similar sailboats it is more spacy than 79% of all other designs. It seems that the designer has chosen a significantly more spacy hull design.


Maintenance

Rig

Dimensions of sail for fractional rig.

mainsail specifications headsail specifications

Are your sails worn out? You might find your next sail here: Sails for Sale



If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Mainsail halyard 34.5 m(113.4 feet)12 mm(1/2 inch)
Jib/genoa halyard34.5 m(113.4 feet)12 mm(1/2 inch)
Spinnaker halyard34.5 m(113.4 feet)12 mm(1/2 inch)
Jib sheet 11.7 m(38.4 feet)14 mm(0.55 inch)
Genoa sheet11.7 m(38.4 feet)14 mm(0.55 inch)
Mainsheet 29.3 m(96.0 feet)14 mm(0.55 inch)
Spinnaker sheet25.8 m(84.5 feet)14 mm(0.55 inch)
Cunningham4.6 m(15.1 feet)12 mm(1/2 inch)
Kickingstrap9.2 m(30.2 feet)12 mm(1/2 inch)
Clew-outhaul9.2 m(30.2 feet)12 mm(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Cyclades 39.3 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References