The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.
The boat is equipped with 4 berths and 190.0 liter fresh water capacity.
The boat may be equipped with dual inboard Volvo Penta diesel engines at 300 hp (223 kW).
The transmission is a Z-drive aka sterndrive.
The fuel tank has a capacity of 600.0 liters (158 US gallons, 131 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
Zaffiro 36 holds a CE certification:
The boat is by European Union certified as Class B. OFFSHORE:The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Zaffiro 36 is about 304 kg/cm, alternatively 1704 lbs/inch.
Meaning: if you load 304 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 1704 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Zaffiro 36 is 3.02.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Zaffiro 36 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.