Review of Seggerling
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Seggerling or similar boat for sale
The hull is made of plywood.
Note: the boat has also been sold to be self-made/-interiored, which means that the quality of each boat may vary.
The Seggerling is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Seggerling is about 46 kg/cm, alternatively 258 lbs/inch.
Meaning: if you load 46 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 258 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Seggerling is 2.94.
Maintenance
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Seggerling it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.