Review of Bavaria 38

The hull is made of hand laid fibreglass. Generally, a hull made of hand laid fibreglass requires only a minimum of maintenance during the sailing season.

The interior is like many other boats made of mahogany. Mahogany belongs to the hardwood species, known for being water-repellent and resistant to decay. It has an attractive wood grain and holds wood polish and varnish well.
The boat is equipped with 2 cabins, 4-6 berths, a galley, 230.0 liter fresh water capacity and toilet facility.

The Bavaria 38 is equipped with a fractional rig. A fractional rig has smaller headsails which make tacking easier, which is an advantage for cruisers and racers, of course. The downside is that having the wind from behind often requires a gennaker or a spinnaker for optimal speed.

Unknown keel type

The boat can only enter major marinas as the draft is about 1.85 - 1.95 meter (6.07 - 6.37 ft) dependent on the load. See immersion rate below.

The Bavaria 38 has been equipped with different engine alternatives.

Alternative 1:

Bavaria 38 may be equipped with an inboard Volvo Penta MD2030 diesel engine at 29 hp (21 kW). Calculated max speed is about 5.7 knots

Alternative 2:

The boat may be equipped with dual inboard Volvo Penta diesel engines at 350 hp (260 kW). Calculated max speed is about 19.7 knots

The fuel tank has a capacity of 150.0 liters (39 US gallons, 32 imperial gallons).

What is Capsize Screening Formula (CSF)?

The capsize screening value for Bavaria 38 is 2.05, indicating that this boat would not be accepted to participate in ocean races.

What is Theoretical Maximum Hull Speed?

The theoretical maximal speed of a displacement boat of this length is 7.6 knots. The term "Theoretical Maximum Hull Speed" is widely used even though a boat can sail faster. The term shall be interpreted as above the theoretical speed a great additional power is necessary for a small gain in speed.

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Bavaria 38 is about 260 kg/cm, alternatively 1459 lbs/inch.
Meaning: if you load 260 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1459 lbs cargo on the boat it will sink 1 inch.

What is Motion Comfort Ratio (MCR)?

The Motion Comfort Ratio for Bavaria 38 is 23.6.

What is L/B (Length Beam Ratio)?

The l/b ratio for Bavaria 38 is 3.05.

What is a Ballast Ratio?

The ballast ratio for Bavaria 38 is 34%.

What is Displacement Length Ratio?

The DL-ratio for Bavaria 38 is 212 which categorizes this boat among 'light crusers & offshore racers'.

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 43m² (462 ft²).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

We are always looking for new photos. If you can contribute with photos for Bavaria 38 it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.