Review of Advantage 160
Basic specs.
If you have a photo you would like to share: Upload Image
Looking for a new boat? Find a Advantage 160 or similar boat for sale
The boat is equipped with 6+1 berths and 1000.0 liter fresh water capacity.
The boat is typically equipped with dual inboard Caterpillar diesel engines at 1320 hp (983 kW).
The fuel tank has a capacity of 2400.0 liters (634 US gallons, 527 imperial gallons).
Sailing characteristics
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Advantage 160 is about 492 kg/cm, alternatively 2757 lbs/inch.
Meaning: if you load 492 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 2757 lbs cargo on the boat it will sink 1 inch.
Sailing statistics
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Advantage 160 is 3.06.
Curiosities
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
Danish definition of a powerboat
Maintenance
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Advantage 160 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.