YachtDatabase.com

Review of Uniesse 75 HT


Basic specs.

sail specifications
The Uniesse 75 HT is a large motorboat. The Uniesse 75 HT is built by the Italian yard Uniesse.

Here we would have liked to show you nice photos of the Uniesse 75 HT.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find an Uniesse 75 HT or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Interior

The boat is equipped with 8+2 berths and 1350.0 liter fresh water capacity.


Engine

The Uniesse 75 HT has been equipped with different engine alternatives.

Alternative 1:

The boat may be equipped with an inboard MAN diesel engine

Alternative 2:

Uniesse 75 HT may be equipped with an inboard Caterpillar C32 Acer 1820 diesel engine at 1820 hp (1355 kW).

Alternative 3:

The boat may be equipped with dual inboard Caterpillar diesel engines at 1570 hp (1169 kW). The speed is 33.0 knots.

The fuel tank has a capacity of 6730.0 liters (1777 US gallons, 1480 imperial gallons).


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Uniesse 75 HT holds a CE certification:

The boat is by European Union certified as Class A. OCEAN:
Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 m and above but excluding abnormal conditions, and vessels largely self-sufficient.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Uniesse 75 HT is about 894 kg/cm, alternatively 5006 lbs/inch.
Meaning: if you load 894 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 5006 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Uniesse 75 HT is 4.26.


Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 570 kW (764 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Uniesse 75 HT it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References