YachtDatabase.com

Review of Rinker Fiesta Vee 290


Basic specs.

sail specifications
The Rinker Fiesta Vee 290 is a motorboat. The Rinker Fiesta Vee 290 is built by the American yard Rinker.

Here we would have liked to show you nice photos of the Rinker Fiesta Vee 290.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Rinker Fiesta Vee 290 or similar boat for sale

Hull

Both the hull and the deck is made of fibreglass. A hull made of fibreglass requires only a minimum of maintenance during the sailing season.

The hull shape is deep V. Generally, a deep V hull gives a more comfortable cruise because it helps the boat cut through waves while minimizing impacts, help the boat bank into turns, and throw less spray. However, a deep V hull reduces stability and requires more power.


Interior

The boat is equipped with 2 cabins and a galley.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Rinker Fiesta Vee 290 is about 216 kg/cm, alternatively 1212 lbs/inch.
Meaning: if you load 216 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1212 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Rinker Fiesta Vee 290 is 3.16.

Wide Slim 58% 0 50 100
Compared with other similar motor boats it is slimmer than 58% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Equation for Danish definition of a powerboat
Danish definition of a powerboat
According to this definition this boat is not categorized as a Powerboat.
Though, if you install a motor of 105 kW (140 hp), then the boat will become a powerboat, and you will need a Danish 'powerboat driving license'


Maintenance

Bottom Paint

When buying anti-fouling bottom paint, it's nice to know how much to buy. The surface of the wet bottom is about 30m2 (322 ft2).
Based on this, your favourite maritime shop can tell you the quantity you need.

Note: If you use a paint roller you will need more paint than if you use a paintbrush.


Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Rinker 290 Fiesta Vee it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References