YachtDatabase.com

Review of Oceanis 411 Celebration




Basic specs.

sail specifications
The Oceanis 411 Celebration aka Beneteau Oceanis Clipper 411 is a large sailboat designed by the French maritime architect Jean-Marie Finot in the late nineties. The Oceanis 411 Celebration is built by the French yard Bénéteau.

Here we would have liked to show you nice photos of the Oceanis 411 Celebration.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find an Oceanis 411 Celebration or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.


Interior

The boat is equipped with 2 cabins, 4 berths, a galley and toilet facility.


Rig

The Oceanis 411 Celebration is equipped with a masthead rig. The advantage of a masthead rig is its simplicity and the fact that a given sail area - compared with a fractional rig - can be carried lower and thus with less heeling moment.


Keel

L-shape fin keel

The Oceanis 411 Celebration is equipped with a L keel. An L-shape keel is a bulb keel with the shape as an L. This keel is less exposed to seaweed, fishing nets and lines.

The boat can only enter major marinas as the draft is about 2.00 - 2.10 meter (6.56 - 6.86 ft) dependent on the load. See immersion rate below.


Engine

Oceanis 411 Celebration may be equipped with an inboard Volvo Penta D2 diesel engine at 55 hp (40 kW).

The transmission is a shaft drive. A shaft drive will in the long run require less maintenance than other types of drive e.g. a sail drive.


Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Oceanis 411 Celebration is 2.00, indicating that this boat would not be accepted to participate in ocean races.


Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Oceanis 411 Celebration is about 337 kg/cm, alternatively 1889 lbs/inch.
Meaning: if you load 337 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1889 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Oceanis 411 Celebration is 3.24.

Slim Wide 58% 0 50 100
Compared with other similar sailboats it is more spacy than 58% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.


SA/D (Sail Area Displacement ratio)

SA/D (Sail Area Displacement ratio)
Indicates how fast the boat is in light wind:
- Cruising Boats have ratios 10-15
- Cruiser-Racers have ratios 16-20
- Racers have ratios above 20
- High-Performance Racers have ratios above 24
Sail-area/displacement ratio (SA/D ratio): 22.75


Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.



Guiding dimensions of running rig
UsageLengthDiameter
Jib sheet 12.8 m(41.9 feet)14 mm(0.55 inch)
Genoa sheet12.8 m(41.9 feet)14 mm(0.55 inch)
Mainsheet 31.9 m(104.8 feet)14 mm(0.55 inch)
Spinnaker sheet28.1 m(92.2 feet)14 mm(0.55 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Oceanis 411 Celebration it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References