Review of Havsörnen II

Basic specs.

The Havsörnen II is a sailboat designed by the Swedish maritime architect Olle Enderlein in the mid sixties. The Havsörnen II is built by the Swedish yard Storebro Bruk AB.

Here we would have liked to show you nice photos of the Havsörnen II.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Havsörnen II or similar boat for sale

Keel

Unknown keel type

The boat can only enter major marinas as the draft is about 1.86 - 1.96 meter (6.10 - 6.40 ft) dependent on the load.

Engine

The boat may be equipped with an inboard Volvo Penta MD2B diesel engine at 25 hp (18 kW).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Stability and Safety

What is Capsize Screening Formula (CSF)?

The capsize screening value for Havsörnen II is 1.72, indicating that this boat could - if evaluated by this formula alone - be accepted to participate in ocean races.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Havsörnen II is 3.53.

Compared with other similar sailboats it is slimmer than 79% of all other designs. It seems that the designer has chosen a significantly more speedy hull design.

Ballast Ratio

What is a Ballast Ratio?

The ballast ratio for Havsörnen II is 44%.

This ballast ratio shows a righting moment that is higher than 69% of all similar sailboat designs. A righting moment (ability to resist heeling) just above average.

RSP (Relative Speed Performance)

What is Relative Speed Performance?

The Relative Speed Performance for Havsörnen II is 8

The relative speed performance is 8 which means that a it is faster than 8% of all similar sailboat designs.

Maintenance

Rig

If you need to renew parts of your running rig and is not quite sure of the dimensions, you may find the estimates computed below useful.

**Guiding dimensions of running rig**
Usage	Length		Diameter
Jib sheet	10.4 m	(34.2 feet)	12 mm	(1/2 inch)
Genoa sheet	10.4 m	(34.2 feet)	12 mm	(1/2 inch)
Mainsheet	26.0 m	(85.4 feet)	12 mm	(1/2 inch)
Spinnaker sheet	22.9 m	(75.1 feet)	12 mm	(1/2 inch)

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Havsörnen II it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.