YachtDatabase.com

Review of Dingo 200S


Basic specs.

sail specifications
The Dingo 200S is a small rib. The Dingo 200S is built by the Ukrainian yard Brig.

Here we would have liked to show you nice photos of the Dingo 200S.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Dingo 200S or similar boat for sale

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Dingo 200S is about 16 kg/cm, alternatively 90 lbs/inch.
Meaning: if you load 16 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 90 lbs cargo on the boat it will sink 1 inch.


Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Dingo 200S is 1.67.

Wide Slim 62% 0 50 100
Compared with other similar RIBs it is slimmer than 62% of all other designs. It seems that the designer has chosen a slightly more speedy hull design.


Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.



Finally

We are always looking for new photos. If you can contribute with photos for Dingo 200S it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.



References