Review of Bavaria S33 HT

Basic specs.

The Bavaria S33 HT is a motorboat. The Bavaria S33 HT is built by the German yard Bavaria Yachtbau GmbH.

Here we would have liked to show you nice photos of the Bavaria S33 HT.
If you have a photo you would like to share: Upload Image

Looking for a new boat? Find a Bavaria S33 HT or similar boat for sale

Hull

The hull is made of fibreglass. Generally, a hull made of fibreglass requires only a minimum of maintenance during the sailing season.

Interior

The boat is equipped with one cabin, 4 berths and 250.0 liter fresh water capacity.

Engine

The Bavaria S33 HT has been equipped with different engine alternatives.

Alternative 1:

The boat may be equipped with an inboard Volvo Penta D6 Evc diesel engine at 380 hp (283 kW).

Alternative 2:

Bavaria S33 HT may be equipped with an inboard Volvo Penta D3-220A-G diesel engine at 220 hp (163 kW).

Alternative 3:

The boat may be equipped with an inboard Volvo Penta diesel engine

Alternative 4:

The boat may be equipped with an inboard MerCruiser engine at 250 hp (186 kW).

Alternative 5:

Bavaria S33 HT may be equipped with an engine.

The fuel tank has a capacity of 520.0 liters (137 US gallons, 114 imperial gallons).

Sailing characteristics

This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.

EU classification

Bavaria S33 HT holds two CE certifications:

If less than 8 in on board the boat is by European Union certified as Class B. OFFSHORE:

Designed for offshore voyages where conditions up to, and including, wind force 8 (Beaufort scale) and significant wave heights up to, and including, 4 m may be experienced.

If less than 10 in on board the boat is by European Union certified as Class C. INSHORE:

Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 (Beaufort scale) and significant wave heights up to, and including, 2 m may be experienced.

Immersion rate

The immersion rate is defined as the weight required to sink the boat a certain level. The immersion rate for Bavaria S33 HT is about 223 kg/cm, alternatively 1249 lbs/inch.
Meaning: if you load 223 kg cargo on the boat then it will sink 1 cm. Alternatively, if you load 1249 lbs cargo on the boat it will sink 1 inch.

Sailing statistics

This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.

L/B (Length Beam Ratio)

What is L/B (Length Beam Ratio)?

The l/b ratio for Bavaria S33 HT is 2.90.

Compared with other similar motor boats it is more spacy than 73% of all other designs. It seems that the designer has chosen a slightly more spacy hull design.

Curiosities

Powerboat?

In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:

Danish definition of a powerboat

According to this definition this boat is categorized as a Powerboat.

Maintenance

Boat owner's ideas

This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.

Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.

Finally

We are always looking for new photos. If you can contribute with photos for Bavaria S33 HT it would be a great help.

If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.

References

[Ref 1]: ISO 8666 Small craft — Principal data.
[Ref 3]: ISO 12215-5 Small craft — Hull construction and scantlings.