The boat is equipped with 8/10 berths and 2000.0 liter fresh water capacity.
The boat may be equipped with dual inboard MTU 16V 2000 M91 engines at 4000 hp (2980 kW). Max speed is 29.0 knots.
The fuel tank has a capacity of 13800.0 liters (3645 US gallons, 3035 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Azimut 100 Jumbo is about 1317 kg/cm, alternatively 7379 lbs/inch.
Meaning: if you load 1317 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 7379 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Azimut 100 Jumbo is 4.52.
Sorry, we do not have sufficient statistical information available for this boat to provide a significant reliable analysis.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Azimut 100 Jumbo it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.