The boat is equipped with 6+1 berths and 1500.0 liter fresh water capacity.
The boat may be equipped with dual inboard Caterpillar diesel engines at 1600 hp (1192 kW).
The fuel tank has a capacity of 3600.0 liters (951 US gallons, 791 imperial gallons).
This section covers widely used rules of thumb to describe the sailing characteristics. Please note that even though the calculations are correct, the interpretation of the results might not be valid for extreme boats.
The immersion rate is defined as the weight required to sink the boat a certain level.
The immersion rate for Advantage 170 is about 569 kg/cm, alternatively 3189 lbs/inch.
Meaning: if you load 569 kg cargo on the boat then it will sink 1 cm.
Alternatively, if you load 3189 lbs cargo on the boat it will sink 1 inch.
This section is statistical comparison with similar boats of the same category. The basis of the following statistical computations is our unique database with more than 26,000 different boat types and 350,000 data points.
What is L/B (Length Beam Ratio)?
The l/b ratio for Advantage 170 is 3.40.
In Denmark, you are required to have achieved a 'powerboat driving license' in order to sail a powerboat.
In this context a boat is considered a powerboat if:
This section is reserved boat owner's modifications, improvements, etc. Here you might find (or contribute with) inspiration for your boat.
Do you have changes/improvements you would like to share? Upload a photo and describe what you have done.
We are always looking for new photos. If you can contribute with photos for Advantage 170 it would be a great help.
If you have any comments to the review, improvement suggestions, or the like, feel free to contact us. Criticism helps us to improve.